| SPECIFICATION | F12100 | F12125 | F12160 | F12200 | |
| Center Height mm | 100 | 125 | 160 | 200 | |
| Swivel angle of spindle from it's horizontal position(upward) | ≤95° | ||||
| Horizontal position(downward) | ≤5° | ||||
| Rotating angle of spindle for one complete revolution of dividing handle | 9°(540 grad.,1'each) | ||||
| Min.reading of vernier | 10” | ||||
| Worm gear ratio | 1:40 | ||||
| Taper of spindle bore | MT3 | MT4 | |||
| Width of locating key.mm | 14 | 18 | |||
| Diameter of short taper of spindlenose for mounting flange mm | Φ41.275 | Φ53.975 | Φ53.975 | Φ53.975 | |
| Hole numbers on index plate | 1st plate | 24,25,28,30,34,37,38,39,41,42,43 | |||
| 2nd plate | 46,47,49,51,53,54,57,58,59,62,66 | ||||
| Individual indexing error of the spindle for one complete revolution of dividing handle | ±45" | ||||
| Cumulate error at any 1/4 periphery of spindle | ±1" | ||||
| Max.bearing Kg | 100 | 130 | 130 | 130 | |
| Net weight Kg | 57 | 83.5 | 100 | 130 | |
| Gross weight Kg | 69 | 96 | 114 | 140 | |
| Case Dimensions mm | 610×459×255 | 536×460×310 | 710×505×342 | 710×535×342 | |
| Model | A | B | C | D | E | F | G | H | L | M | N | O | P |
| F12100 | 162 | 14 | 102 | 87 | 186 | 95 | 116 | 100 | 93 | 54.7 | 30 | 100 | 100 |
| F12125 | 209 | 18 | 116 | 98 | 224 | 117 | 120 | 125 | 103 | 68.5 | 34.5 | 100 | 125 |
| F12160 | 209 | 18 | 116 | 98 | 259 | 152 | 120 | 160 | 103 | 68.5 | 34.5 | 100 | 160 |
| F12200 | 209 | 18 | 116 | 98 | 299 | 192 | 120 | 200 | 103 | 68.5 | 34.5 | 100 | 200 |
| Model | A | B | C | D | E | F | G | H | L | M | N | O | P |
| F12100 | 162 | 14 | 102 | 87 | 186 | 95 | 116 | 100 | 93 | 54.7 | 30 | 100 | 100 |
| F12125 | 209 | 18 | 116 | 98 | 224 | 117 | 120 | 125 | 103 | 68.5 | 34.5 | 100 | 125 |
| F12160 | 209 | 18 | 116 | 98 | 259 | 152 | 120 | 160 | 103 | 68.5 | 34.5 | 100 | 160 |
| F12200 | 209 | 18 | 116 | 98 | 299 | 192 | 120 | 200 | 103 | 68.5 | 34.5 | 100 | 200 |
