| SPECIFICATION | F11 100A | F11 125A | F11 160A | F11200A | ||||||
| Center Height mm | 100 | 125 | 160 | 200 | ||||||
| Swivel angle of spindle from it's horizontal position (upward) | ≤95° | |||||||||
| Horizontal position(downward) | ≤5° | |||||||||
| Rotating angle of spindle for one complete revolution of dividing handle | 9°(540 GRAD;1'each | |||||||||
| Min. reading of vernier | 10" | |||||||||
| Worm gear ratio | 1:40 | |||||||||
| Taper of spindle bore | MT3 | MT4 | ||||||||
| Width of locating key mm | 14 | 18 | ||||||||
| Dia. Of short taper of spindle nose for mounting flange mm | 41.275 | 53.975 | ||||||||
| Hole numbers on index plate | 1st plate | 24,25,28,30,34,37,38,39,41,42,43 | ||||||||
| 2nd plate | 46,47,49,51,53,54,57,58,59,62,66 | |||||||||
| Change gear | Module | 1.5 | 2 | |||||||
| teeth numbers | 25,30,35,40,50,55,60,70,80,90,100 | |||||||||
| Individual indexing error of the spindle for one complete revolution of dividing handle | ±45" | |||||||||
| Cumulate error at any 1/4 periphery of spindle | ±1' | |||||||||
| Max.bearing (kg) | 100 | 130 | 130 | 130 | ||||||
| Net weight(kg) | 67 | 101.5 | 113 | 130 | ||||||
| Gross weight(kg) | 79 | 111.5 | 123 | 140 | ||||||
| Packing size(mm) | 616x465x265 | 635x530x530 | 710x535x342 | 710x535x342 | ||||||
| Model | A | B | C | D | E | F | G | H | L | M | N | O | P |
| F11100A | 162 | 14 | 102 | 87 | 186 | 95 | 116 | 100 | 93 | 54.7 | 30 | 100 | 100 |
| F11125A | 209 | 18 | 116 | 98 | 224 | 117 | 120 | 125 | 103 | 68.5 | 34.5 | 100 | 125 |
| F11160A | 209 | 18 | 116 | 98 | 259 | 152 | 120 | 160 | 103 | 68.5 | 34.5 | 100 | 160 |
| F11120A | 209 | 18 | 116 | 98 | 299 | 192 | 120 | 200 | 103 | 68.5 | 34.5 | 100 | 200 |
