| MODEL | CA6140 | CA6240 | ||
| CA6140B | CA6240B | |||
| Max .Swing over bed | 400mm | |||
| Max .Swing over carriage | 210mm | |||
| Max .Swing in gap | —— | 630mm | ||
| Effective gap length | —— | 210mm | ||
| Max .length of work piece | 750/1000/1500/2000/2200/3000mm | |||
| Width of bed | 400mm | |||
| Section of turning tool | 25×25mm | |||
| Spindle | Spindle speed | 10-1400rpm/16-1400rpm(24steps) | ||
| Hole through spindle | 52mm (A series) 80mm (B series) | |||
| Spindle taper | No.6(MT6)(Φ90 1:20)[Φ113:20] | |||
| Feed | No. of feed | (64 kinds)(for each) | ||
| Range of metric threads | (1-192mm) (44 kinds) | |||
| Range of inch threads | (1-24tpi) (21kinds) | |||
| Range of module threads | 0.25-48 (module 39 kinds) | |||
| Range of diametral pitc threads | 1-96DP (37 kinds) | |||
| Tailstock | Max. tailstock spindle travel | 150mm | ||
| Tailstock spindle diameter | 75mm | |||
| Taper of tailstock spindle center hole | NO.5 (MT5) | |||
| Main motor | 7.5KW(10HP) | |||
| Packing | 750mm | 2440×1140×1750 | ||
| (L×W×H mm) | 1000mm | 2650×1140×1750 | ||
| 1500mm | 3150×1140×1750 | |||
| 2000mm | 3650×1140×1750 | |||
| 2200mm | 4030×1140×1750 | |||
| 3000mm | 4800×1140×1750 | |||
| Weight(kg) | Length | G.W. N.W. | ||
| 750mm | 2100 1990 | |||
| 1000mm | 2190 2070 | |||
| 1500mm | 2350 2220 | |||
| 2000mm | 2720 2570 | |||
| 2200mm | 2800 2600 | |||
| 3000mm | 3300 3200 | |||
